worldwide suppliers of the Schaevitz range of precision accelerometers, inclinometers and load cells from  manufacturing facility in the UK.

* New *

GROUND-BREAKING NEW ACCELEROMETER FROM SHERBORNE SCHAEVITZ

A new range of rugged, high accuracy linear accelerometers is now available from Sherborne Schaevitz. Featuring state-of-the-art air damped inertial sensor technology, the A640 series offers galvanic input/output isolation, simultaneous low-pass filtered and unfiltered ± 5Vdc outputs and integral damping. Utilising unregulated 6 to 32 VDC supply voltage, the Sherborne Schaevitz A640 series is available in standard ranges from ±1g to ±20g. Cost effective, the A640 is suitable for use in a wide range of industrial, civil and military applications.

 
  Inclinometers
Our ranges of precision closed loop inclinometers are extremely sensitive transducers measuring horizontal and vertical inclination with virtually infinite resolution using a precision 'taut band' sensor mechanism. Typical applications include those where highly accurate tilt measurement is required, including road and pavement grading, borehole alignment, weapon sighting equipment, satellite dish alignment, tilting train control, rail track monitoring, seismic and civil engineering analysis.
LSOP/LSOC

LSOP/LSOC
The LSO Series is a high precision inertial referenced closed loop tilt sensor for commercial and military applications.
* Ranges of ±1° to ±90°
* Choice of connector-type or solder-pin termination.

 

 
T233/T235

T233/T235
The T233 is a compact, dual-axis (x-y) unit that incorporates a closed loop torque balanced gravity referenced servo system. Offers the same high performance and environmental characteristics as the LSOP/LSOC models.

* Ranges ±1° to ±90°

 

 
T435 - TILT SENSOR

T435 - TILT SENSOR
The T435, is a high precision inertial-referenced, closed-loop, tilt sensor designed for applications where space is limited. It is stackable for x & y measurements which makes it particularly suitable for down-hole logging applications.

* Ranges ±3° to ±90°

 

 
T335

T335
The T335 has a 23.1mm diameter cylindrical housing that is ideal for down-hole applications, and may be stacked for x-y dual axis tilt measurement. Incorporates a closed loop torque balanced gravity referenced servo system.

* Ranges ±14.5° to ±90°

 

 
The AccuStar® Electronic Clinometers

The AccuStar® Electronic Clinometers
Single Axis +/- 60 degrees range.
Choice of four models: ratiometric, analogue, serial data and digital pulse width output.

 

 
The AccuStar® II/DAS 20

The AccuStar® II/DAS 20
Dual Axis Clinometer +/- 20 degrees range. Ratiometric voltage and digital pulse width output in one package.

 

 
The AccuStar® II/DAS-30

The AccuStar® II/DAS-30
Mini Dual Axis Dome +/- 30 degree dome. Only to meet the needs of OEM higher volume requirements.

 

 
AngleStar® Protractor System (1)

AngleStar® Protractor System (1)
Stand-alone clinometer and digital display. No external power required. Available in three ranges ± 20 ° , ± 45 ° & 0 to 90°.

 

 
AngleStar® Digital Protractor DP45

AngleStar® Digital Protractor DP45
Stand alone portable unit with integral digital display. It has a range of +/-45 degrees. No external power is required. Available in a range of +/-45 degrees.

 

   Accelerometers
Our range of Servo Accelerometers measure vector acceleration with high accuracy using closed loop servo force-balance principles.

Typical applications include:

· data acquisition systems
· crash recorders
· fatigue life monitoring & prediction for stabilising platforms on space & ship- borne satellite tracking systems
· monitoring and controlling deceleration in mass transit systems
· road bed analysis
· fault detection equipment for high speed railways
· military and civil flight simulators
· autopilots and low frequency vibration monitoring

For an introduction to “Servo Accelerometer Technology” download the A215/A220 datasheet.
 
A215/A220

A215/A220
The A220 Series are high precision closed loop accelerometers. The compact integrated design accommodates optional electronic circuits including biased and low impedance outputs.

* Ranges 1g to 20g. For other ranges, please consult the factory.

 

 
A250/A260

A250/A260
The A250/260 Series are designed for vehicle and aerospace use where input voltages will fluctuate.

* Ranges 1g to 20g. For other ranges, please consult the factory.

* Input voltages 11-18V and 16-32 VDC

 

 
 

A545
The A545 Series incorporate piezo-resistive silicone sensors and offer good levels of performance in a small package.

* Ranges 2g to 500g

* mV Output from 8 to 32 Vdc Unregulated Supply
 

 

 
 

A640
The A640 Series piezo resistive accelerometer with filtered and unfiltered outputs as standard. Same mounting dimensions as the discontinued A400 series.

* Ranges 1g to 20 g

* +/-5Vdc Output from 6 to 32Vdc Unregulated Supply