|
|
Scanning Frames
Scanners - Dual-sided
Scanners - Rotary
Scanners - Single-sided
 |
|
Scanners - Dual-sided
|
|
|
|
|
When
you need a transmission sensor, but don't need to measure a
large web, NDC Infrared Engineering has a solution for you. The
MiniTrak-C is a single beam scanner with a C-beam traversing
across the web. This allows up to two trasmission or reflective
sensors to make their measurements while maintaining the
appropriate sensor registration, giving you a larger variety of
sensor options, without the cost of a dual beam scanner.
|
Web Width up to 2.2 meters (88
in)
Mount up to Two Sensors
(Transmission or Reflectance)
Fast, Accurate Bi-directional
Scanning
Options for Several Operating
Environments
|
|
|
|
The AccuTrak O-frame scanner
provides industry-leading scanning precision for the best
cross-web profiling performance. This is coupled with an
extremely reliable drive and rail system, which is easily
accessible in the rare event that maintenance is required.
This high level of cross-web
scanning precision is achieved through a combination of box-beam
construction, which provides needed stiffness, and a proprietary
rail-alignment system that makes the scanning rails perfectly
equidistant at any point along the beam. To further enhance
performance, a novel carriage system, utilizing engineering
polymer wheels rather than traditional linear bearings, provides
for the tightest scanning tolerances and a rail system that can
never be scored.
The scanner is available in
widths from 30" (0.75m) to 392" (10m) |
Unsurpassed Scanner Stability &
Alignment
High Speed Bi-directional
Scanning
Supports up to Four
Reflectance or Transmission Sensors
Self Lubricating Bearings
Multiple Beam Orientations
Easy Access for Maintenance
Easy Head Separation for
Sensor Maintenance
Options:
Clean room orientation
Explosion-proofing option (ATEX)
Frame Purge Option
Hazardous Area Option
Open-ended option for high
speed Biax line threading
|
|
|
|
|
|
When
it comes to making precise scanners to assure the cross-web
performance of our extremely accurate sensors, NDC Infrared
Engineering excels. With its new MiniTrak scanning family, we
continue this trend.
The MiniTrak-O frame is
designed for small webs (2.2 meters or less) scanning up to two
transmission or single sided sensors. With its small footprint,
it can fit into many places that other scanners cannot. It's
also designed for high reliability, easy service access, and
long life. |
Scans on webs up to 2.2 meters
(88 in.)
Small Scanner Footprint
Good Scanner Run-out
Performance
Up to Two Sensors
(Transmission or Single Sided)
Options for Hazardous or Harsh
Environments
|
Scanners - Rotary
|
|
|
|
|
The
Blown Film Rotary scanner is used to significantly improve the
feedback time for the gauging system to generate a polar plot of
the bubble profile. Without this scanner, the system must wait
for the device being used to randomize profile variation (e.g.
oscillating die or haul-off) to complete one rotation before an
update can occur, which can take several minutes, versus a scan
per minute (dependent on bubble diameter) with the rotary
scanner.
The rotary scanner is designed
to be installed below the collapsers and above the frost line to
insure the best quality of measurement possible. Several
diameter rotary scanners are available to match the needs of the
individual blown film process. |
Faster response for quicker
start-ups
Reduced start-up scrap
Essential for good Auto
Profile control via heated die bolts or segmented air rings
Extremely reliable
Easy to service
|
|
|
|
|
|
The
Pipe Rotary scanner is designed to work with the 4100TC Pipe
measurement and control system and a standard Gamma Backscatter
(GBS) probe. The scanner includes a unique, patented sensor
mount that keeps the probe perpendicular to the pipe surface for
the most accurate measurement possible. Three scanner sizes are
available, to handle pipe diameters up to 10" (254 mm), 20"
(508mm), and 40" (1016 mm), respectively. |
Sensor mount fixture keeps gauge
perpendicular to pipe surface
Handles a wide array of pipe
diameters
Extremely reliable
Easy to service
|
Scanners - Single-sided
|
|
|
|
|
When
it comes to making accurate scanners capable of installation
into the harshest environments, NDC Infrared Engineering excels.
With its new MiniTrak scanning family, we continue this trend.
The MiniTrak-S Single Beam
Scanner is available for web widths as large as 6.1 meters,
while still maintaining the sensor plateau required for accurate
measurement. With it's small scanner footprint, it can be placed
where other scanners cannot go. In addition, up to two sensors
can be mounted in any orientation necessary for your
application. |
Scans on Web Widths up to 6.1
meters (20 feet)
Fast, Accurate Bi-directional
Scanning
Handles up to two Reflection
Sensors
360 degree orientation
capability
|
|
products
