SB-i886 (886BASE) Board
|
|
|
|
|
Top view |
Bottom view |
View with interface cables |
| SB-i886 Highlights | |
|
The
SB-i886 is a PC/104+ compliant, single board computer. It
uses a CM-i886
module to implement most of the provided functions and also
implements several additional important functions on-board. The rich
set of features provided by the SB-i886 is customizable according to
the price / performance targets of the user's application.
The SB-i886 contains PC/104+ expansion connectors which open it to the wide range of standard peripheral cards. Furthermore, the SB-i886 contains a PCMCIA / Card Bus controller and slots. A PCMCIA card may be inserted and secured in the slot, with no additional mechanical means. Off-the-shelf PCMCIA modules can extend the system with capabilities such as a larger solid state disk, modem, and wireless LAN.
|
Block Diagram
SB-i886 Features
The "SB Option" column specifies the P/N code
of SB-i886 required to have the particular feature. The "CM Option"
column specifies the P/N code of CM-i886 required to have the particular
feature. SB-i886 content is the combination of features provided by the
attached CM-i886 and the features implemented on the SB-i886 itself. To
have a particular feature, both the CM and SB options of that feature must
be implemented.
"+" means that the feature is always available,
regardless of P/N code.
| Feature | Specification | SB Option |
CM Option |
| CPU SDRAM Flash Disk |
See Features List of CM-i886 module | ||
| COM 1 | RS-232 levels, standard 10-pin header for DB-9 cable/connector | + | + |
| COM 2 | RS-232 / RS-485 / TTL level options, standard 10-pin header for DB-9 cable/connector | + | + |
| IrDA | Standard header for SIR LED module | + | + |
| LPT (Parallel Port) | Standard 26-pin header for DB-25 cable/connector. Shared with FDC | + | + |
| IDE | PIO and ATA-66 modes. Standard 40-pin header for HDD cable. | + | + |
| FDC | Routed through LPT header | + | + |
| Ethernet | One or two 10/100BaseT Ethernet ports.
Realtek RTL8139 controller with MAC and PHY functions, PCI
interface. 10-pin header per port. Optional interface module with transformer, RJ-45 connector and activity LED's. |
+ | E1 or E2 |
| CRT Monitor | 10-pin header. Optional interface module with HD-15 VGA connector. | + | G1/G2 |
| LCD Panel | 51-pos FPC connector for direct interface to certain LCD panels | + | G2 |
| PS/2 | Standard headers for PS/2 cable/connector | + | + |
| GPIO | 20 lines, through 50-mil header. | + | + |
| PCMCIA / Card Bus | TI PCI1420 controller. Support for
16-bit PCMCIA and 32-bit CardBus standards. Single or dual PCMCIA / Card Bus slot with card guides, for card types I, II and III. |
C1 or C2 |
+ |
| USB | 2 Host ports, 12 Mbps. Header for Type-A cable/connector. | + | + |
| Sound I/O | CS4202 audio codec. Header for standard cable/connectors for Microphone (mono), Line input and Speakers (stereo) | A | + |
| PC104 | LPT-to-ISA bridge. PC/104 bus through standard PC/104 connector | P | + |
| PC104+ | PCI bus through standard PC/104+ connector | R | + |
Electrical, Mechanical and Environmental Specifications
| Power Supply | 5.0V @1-8A and 3.3V @1-3A. Current depends on CPU type and speed | ||||||
| Dimensions | 96 mm x 91 mm x [30-40 ] mm. Height ranges from 30 mm to 40 mm, depending on the connectors assembled. Height specified includes the CM-i886 module with heatsink. | ||||||
| Operation temp (case) |
| ||||||
| Weight | 200 gram | ||||||
| Storage temperature | -40o to 85o C | ||||||
| Relative humidity | 10% to 90% (operation) 05% to 95% (storage) | ||||||
| Shock | 50G / 20 ms | ||||||
| Vibration | 20G / 0 - 600 Hz |