SB-i586 (586BASE) Board                

Mature product - not for new designs

Top, front

 

 Top, rear Bottom, front
SB-i586 Highlights

  • PC/104+ Single Board Computer using the CM-i586 module

  • ElanSC520 CPU @100-133 MHz

  • PCI and ISA expansion buses in PC/104 format

  • 16 - 64 MB SDRAM

  • 1 - 512 MB Flash Disk

  • COM1 - 4 with RS232 / RS485 / RS422 / TTL driver options

  • IrDA, LPT, GPIO, PS/2 keyboard and mouse

  • Hard and floppy disk interfaces

  • Single or dual 10/100BaseT Ethernet ports (optional)

  • Single or Dual Card Bus (PCMCIA) slots (optional)

  • USB port (optional)

  • Lithium battery for RTC

  • Small size - 116 mm x 96 mm

 The SB-i586 is a standard PC/104+ compliant, single board computer. It uses a CM-i586 module to implement most of the provided functions and also implements several additional important functions on-board. The rich set of features provided by the SB-i586 is customizable according to price / performance targets of the user's application.

The SB-i586 contains a PC/104+ expansion connector which opens it to the wide range of standard peripheral cards. Furthermore, the SB-i586 contains a Card Bus controller and slots.  A PCMCIA card may be inserted and secured in the slot, with no additional mechanical means. Off-the-shelf PCMCIA modules can extend the system with capabilities such as a larger solid state disk, modem, and wireless LAN.




SB-i586 Block Diagram

Electrical and Mechanical Specifications
Power Supply Option 1 : Single 3.3V (limited to certain configurations)
Option 2 : Single 5.0V
Option 3 : Single 12V, unregulated
Dimensions 116 mm x 96 mm x [10-22 ] mm.
Height ranges from 10 mm to 22 mm, depending on the connectors assembled. Height specified includes the CM-i586 module.
Operation temp (case)
Commercial:    0o to 70o C
Extended: -20o to 70o C
Industrial: -40o to 85o C. 
Storage temperature -40o to 85o C
Relative humidity 10% to 90% (operation)
05% to 95% (storage)
Shock 50G / 20 ms
Vibration 20G / 0 - 600 Hz
Connector
insertion / removal		 50 cycles
Connectors
COM1 RS232 levels, DB-9 connector
COM2 RS232 / RS485 / RS422 / TTL level options, standard 10-pin header
COM3 - 4 RS232 / RS485 / RS422 level options, 50-mil header
LPT (Parallel Port) Standard 26-pin header
IDE Standard 40-pin header. Direct interface to IDE hard disk cable
FDC Routed through LPT header
Ethernet One or two RJ-45 connectors for 10/100BaseT Ethernet plugs
PS/2 Standard PS/2 connectors for keyboard and mouse
GPIO Part of ports connected to 50-mil header.
Other part of ports are shared with ISA on PC/104 connector.
Card Bus Slot Single or dual Card Bus slot with card guides, for cards type I, II and III.
USB Host or Slave interface, Type-A connector.  
PC104+ ISA and PCI Buses through standard PC/104 and PC/104+ connectors
IrDA SIR and FIR LED module and 10-pin header

Second ETHERNET Port
(optional)

Controller Intel 82559 or 82551, including MAC and PHY functions
Network Interface 10BaseT / 100BaseTx, Activity LED's
Bus Interface PCI

CardBus / PCMCIA controller
(optional)

Controller Texas Instruments PCI1420, dual slot, CardBus / PCMCIA
Bus Interface PCI