ATX-i686 Board
|
|
|
|
Top view |
Bottom view |
| ATX-i686 Highlights | |
|
The
ATX-i686 is a
small single board computer with industry standard Mini-ATX form
factor. It is implemented by a combination of the
CM-i686 module and
the ATX baseboard.
Based on AMD's Geode architecture, the ATX-i686 board delivers a price / feature ratio better than any traditional X86-based alternative. The ATX-i686 is especially attractive for applications requiring a combination of low price and low power consumption with features such as USB, Ethernet and LCD Panel interfaces. The ATX-i686 has industry standard Mini-ATX form factor, providing an attractive alternative to many other ATX cards available in the market. Within CompuLab's product line, the ATX baseboard is also compatible with the CM-X255 and CM-i886 boards, enabling the flexibility required in a dynamic market where application requirements can change rapidly. |
Block Diagram
| * Grayed blocks specify functions not used in the ATX-i686, but required for other CORE modules. |
ATX-i686 Features
The "ATX Option" column specifies the P/N code of ATX baseboard required to have the particular feature. The "CM Option" column specifies the P/N code of CM-i686 required to have the particular feature. ATX-i686 content is the combination of features provided by the attached CM-i686 and features implemented on the ATX baseboard itself. To have a particular feature, both CM and ATX options of that feature must be implemented.
"+" means that the feature is always available, regardless of P/N code.
| Feature | Specification | ATX Option |
CM Option |
| CPU SDRAM Flash Disk |
See Features List of CM-i686 module | ||
| COM 1 | Full modem, RS-232 levels, DB-9 connector | + | + |
| COM 2 | Rx/Tx only, RS-232 / RS-422 / RS-485 levels, 10-pin header | X | + |
| COM 3 | Full modem, RS-232 or TTL levels, 10-pin header | Y | S |
| COM 4 | Full modem, RS-232 / RS-485 / RS-422, 10-pin header | Z | S |
| IrDA | SIR and FIR modes. Standard header for IrDA module | + | + |
| LPT | 26-pin header for DB-25 cable/connector. Shared with FDC | + | S |
| IDE | UDMA, ATA-33 modes. 40-pin header for HDD cable | + | + |
| FDC | Routed through LPT header | + | S |
| Ethernet | One or two 10/100BaseT
Ethernet ports. Realtek RTL8139 controller. RJ-45 connectors and
activity LED's. Options: - Single port - Dual port |
+ E |
E E |
| LCD Panel | TFT panel support. (No STN support). 51-pos FPC connector for direct interface to certain TFT panels. | L | + |
| CRT Monitor | Resolution up to 1280 x 1024. DB-15 VGA connector. | + | G2 |
| TV output | NTSC and PAL | + | G1 |
| VIP | Video input port, CCIR656, on 50-mil common header | + | + |
| PS/2 | Two PS/2 connectors for keyboard and mouse | + | S |
| GPIO | 20 lines, on 100-mil header. | + | S |
| CardBus | CardBus / PCMCIA controller. One or two slots with card guides, for card types I, II and III. | Cx | + |
| Host USB | Three Host ports, 12 Mbps. Type-A connector. | + | + |
| Sound I/O | Standard connectors for Microphone (mono), Line input and Speakers (stereo) | + | A |
| PCI | Single PCI slot, straight | + | + |
| RTC | Real time clock, powered by on-board lithium battery | + | + |
Electrical, Mechanical and Environmental Specifications
| Power Supply | 5.0V or 3.3V (The 3.3V option is only for cards without Audio and Super-I/O chips) | ||||||
| Dimensions | 17 x 17 x 3 cm. Height can vary, depending on the connectors assembled. Height specified includes the CM-i686 module. | ||||||
| Operation temp (case) |
| ||||||
| Storage temperature | -40o to 85o C | ||||||
| Relative humidity | 10% to 90% (operation) 05% to 95% (storage) | ||||||
| Shock | 50G / 20 ms | ||||||
| Vibration | 20G / 0 - 600 Hz |