ATX-i886 Board                

Top view

Bottom view

ATX-i886 Highlights

  • Mini-ATX Single Board Computer implemented by an mini-ATX baseboard and CM-i886 module

  • Pentium III or Celeron CPU
    selection, 600 to 1260 MHz

  • 32 - 384 MB SDRAM

  • 16 - 512 MB Flash Disk

  • PCI slot

  • COM1 - 2 with RS232 / RS485 / RS422 / TTL driver options

  • LPT, GPIO, PS/2 keyboard and mouse interfaces

  • Two Host USB ports

  • Hard and floppy disk interfaces

  • VGA graphics controller. Connectors for  LCD panel and  CRT monitor

  • Sound I/O (optional)

  • Up to three 10/100BaseT Ethernet ports (optional)

  • Single or Dual PCMCIA and CardBus  slots (optional)

  • Power consumption - 20 to 40 W

 The ATX-i886 is a small single board computer with industry standard Mini-ATX form factor. It is implemented by a combination of an CM-i886 module and ATX baseboard.

Based on Intel's Pentium III CPU and 82815 chipset, the ATX-i886 board delivers a high-end solution for performance-demanding applications.  The ATX-i886 is especially attractive for applications requiring a combination of a powerful CPU, small form factor, affordable price and high degree of functional flexibility.

The ATX-i886 has industry standard Mini-ATX form factor, providing an attractive alternative to many other ATX cards available in the market. Within CompuLab's product line, the ATX baseboard is also compatible with the CM-X255 and CM-i686 boards, enabling the flexibility required in a dynamic market where application requirements can change rapidly.




Block Diagram

* Grayed blocks specify functions not used in the ATX-i886, but required by other CORE modules.

ATX-i886 Features

The "ATX Option" column specifies the P/N code of ATX baseboard required to have the particular feature.  The "CM Option" column specifies the P/N code of CM-i886 required to have the particular feature. ATX-i886 content is the combination of features provided by the attached CM-i886 and features implemented on the ATX board itself. To have a particular feature, both CM and ATX options of that feature must be implemented.

"+" means that the feature is always available, regardless of P/N code.

Feature Specification ATX
Option		 CM
Option
CPU
SDRAM
Flash Disk		 See Features List of CM-i886 module    
COM 1 Full modem, RS-232 levels, DB-9 connector + +
COM 2 Full modem, RS-232 / RS-422 / RS-485 levels, 10-pin header X +
IrDA SIR mode. Standard header for IrDA module + +
LPT 26-pin header for DB-25 cable/connector. Shared with FDC + +
IDE UDMA, ATA-66 modes. 40-pin header for HDD cable + +
FDC Routed through LPT header + +
Ethernet Up to three 10/100BaseT Ethernet ports. Intel 82551 controller. RJ-45 connectors and activity LEDs. Options:
- One port
- Two port
- Three ports (third port interface on 10-pin header)

+
E
E

E1
E1
E2
LCD Panel STN and TFT panels support. 51-pos FPC connector for direct interface to certain TFT panels. L G2
CRT Monitor Resolution up to 1600 x 1200. DB-15 VGA connector. + G1
PS/2 Two PS/2 connectors for keyboard and mouse + +
GPIO 20 lines, on 100-mil header. + +
CardBus CardBus / PCMCIA controller. One or two slots with card guides, for card types I, II and III. Cx +
Host USB Two Host ports, 12 Mbps. Type-A connector.   + +
Sound I/O Standard connectors for Microphone (mono), Line input and Speakers (stereo) A +
PCI Single PCI slot, straight + +
RTC Real time clock, powered by on-board lithium battery + +

Electrical, Mechanical and Environmental Specifications

Power Supply 5.0V @ [2-7] A, 3.3V @ 3A
Consumption from 5V depends on CPU speed
Dimensions 17 x 17 x 3 cm.
Height can vary, depending on the connectors assembled. Height specified includes the CM-i886 module.
Operation temp (case)
Commercial:    0o to 70o C
Extended: -20o to 70o C
Industrial: -40o to 85o C.
Storage temperature -40o to 85o C
Relative humidity 10% to 90% (operation)
05% to 95% (storage)
Shock 50G / 20 ms
Vibration 20G / 0 - 600 Hz